HM122 Portable Sawmill
Woodland Mills designed the HM122 sawmill for budget minded customers looking at getting into milling their own lumber at a reasonable price point. Based off of our very popular HM126 model, the HM122 offers hobby sawyers an economical and well engineered mill. Ability to mill logs up to 22” in diameter and 10’ in length.
$299 Flat Rate
Woodland Mills designed the HM122 sawmill for budget minded customers looking at getting into milling their own lumber at a reasonable price point. Based off of our very popular HM126 model, the HM122 offers hobby sawyers an economical and well engineered mill. Featuring a powder coated structure and a 7.0 H.P Kohler gas engine, this mill is a good choice for hobby sawyers.
- 7.0 H.P Kohler gas engine
- Centrifugal clutch blade engagement system
- 22″ log diameter capability
- 18″ throat opening between blade supports
- Capable of cutting 16″ square cants
- 10 ft log lengths (additional tracks available)
- 16″ cast iron band wheels
- Hand crank system to raise and lower the head with very little effort
- Water tank drip system to keep the blade lubricated while cutting
- Powder coated and galvanized steel finishes
- “Gas and Go” easy handle throttle design
The mill is capable of cutting 22″ diameter logs up to 10 ft long. Extra track sections are available in 6 ft increments. Capable of squaring cants at 16″ or live edge boards at 18″ wide. It can also skim veneers at as thin as 1/16 of an inch. The HM122 will cut within 1″ of the deck ensuring that you maximize your usable board foot output.
Our mills are powered by a 7.0 H.P 4-cycle Kohler gas engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty.
Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.
The head of our sawmill rolls along rigid 2.5″ x 2.5″ “L” channel which is cross supported with heavy duty 2 3/8″ x 4 3/4″ rectangle log bunks. These heavy duty cross supports also provide additional rigidity to the track system. The track also features one easy to use adjustable log clamp to securely hold the log while milling. The track itself consists of two 6 ft sections allowing for 10 ft log lengths. Additional 6 ft tracks may be attached to accommodate logs of any length.
All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature.
The head moves up and down along galvanized steel channel via a very easy to turn hand crank system.The blade is kept lubricated by utilizing a water drip system. This prevents sap from gumming up your blade.
The HM122 utilizes 1.25″ x 125″ x 0.042″ Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ to maximize the most amount of lumber per log.
The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.
* Stocked items are delivered to your door within 2 to 11 business days. Tailgate service provided to most areas.
Approximate Delivery Times
Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.
Before our sawmills were developed, we looked at the competitors in great detail to ensure our sawmills were going to meet, if not exceed the competition. The end result is a line of well valued sawmills to fit any budget and that offers excellent quality coupled with some impressive stats. The below table details many important features to consider when deciding on a suitable sawmill to meet your needs. Whether you choose a Woodland Mills sawmill or another model, the below sawmill comparison table should help get you started in the right direction.
|Centrifugal Clutch||Yes||22″||16″||10 ft||16″|
|HM126||Kohler Command Pro
|Centrifugal Clutch||Yes||26″||19″||10 ft||19″|
|Centrifugal Clutch||Yes||30″||22″||10 ft||19″|
||$3,175 USD||HFE 21||Briggs & Stratton
|Centrifugal Clutch||Yes||21″||18″||10 ft||16″|
||$4,995 USD||HFE 30||13hp||Centrifugal Clutch||Yes||30″||12 ft||19″|
||$4,395 USD||LT10||10hp||Tension Clutch||Yes||24″||19.5″||11 ft|
||$4,397 USD||MN26||OHV Briggs
|Centrifugal Clutch||Yes||26″||17″||12 ft||19″|
|Centrifugal Clutch||Yes||29″||22″||12 ft||19″|
||$3,900 USD||Wood Buddy||Honda
||$3,995 CAD||Little 9.5||Kohler
|Centrifugal Clutch||Yes||24″||18″||16 ft||18″|
|Centrifugal Clutch||Yes||32″||24″||10.5 ft||19″|
|Tension Clutch||Yes||28″||23″||17′ 8″|
|Electric Clutch||Yes||29″||16″||17′ 9″|
*The above information is for reference only. Please contact the individual manufacturers for up to date information.