HM126 Portable Sawmill
HM126 Portable Sawmill with 9.5 horsepower Kohler engine. Ability to mill logs up to 26” in diameter and 10’ in length. Additional tracks can be purchased to increase log length capacity.
$349 Flat Rate
The HM126 was designed and engineered by Woodland Mills to fill a void in the sawmill industry. The reliable HM126 offers sawyers an economical and durable solution to their needs. From the powder-coated structure, to the reliable 9.5 H.P. Kohler gas engine, this mill will exceed your expectations.
All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature.
The head moves up and down along galvanized steel channel via a very easy to turn hand crank system.
The blade is kept lubricated by utilizing a water drip system. This prevents sap from gumming up your blade.
- 9.5 H.P Kohler gas engine
- Rigid 4 post head design
- Centrifugal clutch blade engagement system
- 26″ log diameter capability
- 19″ Square Cants
- 10 ft log lengths (additional tracks available)
- 19″ cast iron band wheels
- 10L aluminum lubrication tank to keep the blade lubricated while cutting
- Hand crank system to raise and lower the head with very little effort
- Powder coated and galvanized steel finishes
- “Gas and Go” easy handle throttle design
The mill is capable of cutting 26-inch diameter logs up to 10-feet long. Additional track sections are available in 6-foot increments. Capable of squaring cants at 19-inches or skimming veneers at as thin as1/16 of an inch. The HM126 will cut within 1-inch of the deck ensuring you maximize your usable board foot output.
The HM126 sawmill is powered by a 9.5 H.P 4-cycle Kohler gas engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty.
Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.
The head of our machine rolls along rigid 2.5″ x 4″ galvanized “L” channel which is cross supported with heavy duty 3″ x 6″ rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentation. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track itself consists of two 6 ft sections allowing for 10 ft log lengths. Additional 6 ft tracks may be attached to accommodate logs of any length.
The HM126 utilizes standard 1.25″ x 144″ x .042″ Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ to maximize the most amount of lumber per log.
The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.
* Most orders can be shipped to your home or business address with curbside delivery. Tailgate service is also offered to most regions. To confirm that your area is eligible for curbside/tailgate delivery, feel free to call us at 1-855-476-6455. Stocked items are typically shipped out of our warehouse within 2-3 business days and shipping times range from 3-10 days. Once your order is shipped, a tracking number will be provided for a more accurate delivery day.
Approximate Delivery Times
Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.
Before our sawmills were developed, we looked at the competitors in great detail to ensure our sawmills were going to meet, if not exceed the competition. The end result is a line of well valued sawmills to fit any budget and that offers excellent quality coupled with some impressive stats. The below table details many important features to consider when deciding on a suitable sawmill to meet your needs. Whether you choose a Woodland Mills sawmill or another model, the below sawmill comparison table should help get you started in the right direction.
|Centrifugal Clutch||Yes||22″||16″||10 ft||16″|
|HM126||Kohler Command Pro
|Centrifugal Clutch||Yes||26″||19″||10 ft||19″|
|Centrifugal Clutch||Yes||30″||22″||10 ft||19″|
||$3,175 USD||HFE 21||Briggs & Stratton
|Centrifugal Clutch||Yes||21″||18″||10 ft||16″|
||$4,995 USD||HFE 30||13hp||Centrifugal Clutch||Yes||30″||12 ft||19″|
||$4,395 USD||LT10||10hp||Tension Clutch||Yes||24″||19.5″||11 ft|
||$4,397 USD||MN26||OHV Briggs
|Centrifugal Clutch||Yes||26″||17″||12 ft||19″|
|Centrifugal Clutch||Yes||29″||22″||12 ft||19″|
||$3,900 USD||Wood Buddy||Honda
||$3,995 CAD||Little 9.5||Kohler
|Centrifugal Clutch||Yes||24″||18″||16 ft||18″|
|Centrifugal Clutch||Yes||32″||24″||10.5 ft||19″|
|Tension Clutch||Yes||28″||23″||17′ 8″|
|Electric Clutch||Yes||29″||16″||17′ 9″|
*The above information is for reference only. Please contact the individual manufacturers for up to date information.