HM126 XL sawmill trailer package
portable sawmillportable sawmillportable sawmillportable sawmill

HM126 Trekker XL

$6,098.00

The HM126 Trekker XL features our exceptionally designed HM126 sawmill mounted onto an extended 16'11″ (5.1m) length version of the Woodland Mills Trekker trailer to offer sawyers the perfect balance between power and mobility. The quick connect trailer package is rugged enough to handle rough terrains yet fully capable of smooth highway travel.

With the powerful and reliable 9.5 H.P. Kohler gas engine and the ability to mill logs up to 26” (66cm) in diameter, the HM126 Trekker XL is the perfect combination for sawyers who require a powerful, yet highly mobile milling operation.

Product Description


All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn and well located hand crank system. The blade is kept lubricated by utilizing a water drip system to prevent sap from gumming up your blade.


Sawmill Facts

  • 9.5 H.P Kohler gas engine
  • Rigid 4 post head design
  • Centrifugal clutch blade engagement system
  • 26″ (66cm) log diameter capability
  • 19″ (48cm) square cants
  • 16’11″ (5.1m) log lengths
  • 19″ (48cm) cast iron band wheels
  • 2.6 Gallon (10L) aluminum lubrication tank to keep the blade lubricated while cutting
  • Hand crank system to raise and lower the head with very little effort
  • Powder coated and galvanized steel finishes
  • “Gas and Go” easy handle throttle design

Gross Vehicle Weight: HM126 Trekker XL Package (HM126 Sawmill & Trekker XL Trailer) – 1,695 lbs (770kgs). Note: This package is not designed to carry cargo.

Sawmill Trailer Facts

  • 19’ 3″ track providing the ability to cut log lengths up to 16’ 11″ (5.1m)
  • Galvanized steel frame
  • Torsion axle suspension system
  • Department of Transportation (DOT) approved tires
  • 4 pin LED light kit (stop, turn, tail, side markers and licence plate light)
  • Safety chains
  • 2” (50mm) ball receiver
  • 6 leveling jacks enable quick and stable sawmill setup on uneven ground
  • Sawmill head locking kit (locks the head to the trailer for transport)

portable sawmill

Cutting

The mill is capable of cutting 26″ (66cm) diameter logs up to 16′ 11″ (5.1m) long.  Capable of squaring cants at 20″ (50cm) or skimming veneers at as thin as 1/16″ (1.6mm). The HM126 Trekker XL will cut within 1″ (25mm) of the deck ensuring you maximize your usable board foot output.


Power

The HM126 sawmill is powered by a 9.5 H.P 4-cycle Kohler gas engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty.

Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.

Offical Kohler CH395 Engine Site


portable sawmill

portable sawmill

Track System

The head of our machine rolls along rigid 2.5″ x 4″ (63mm x 101mm) galvanized “L” channel which is cross supported with heavy duty 3″ x 6″ (76mm x 152mm) rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentations. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track allows for 16’11” (5.1m) log lengths.

 

The track system is mated to the trailer package which features 1/4” (6mm) thick laser cut and bent side plates and tubular cross supports making the two work together to create an extremely rigid chassis.


Blades

The HM126 utilizes standard 1.25″ x 144″ x .042″ (32mm x 3658mm x 1mm) Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ (2mm) to maximize the most amount of lumber per log.

portable sawmill

portable sawmill

Warranty

The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (tires, belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.

Shipping Information

* Stocked items are delivered to your door within 2 to 11 business days. Tailgate service provided to most areas.

Approximate Delivery Times

Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.

Product Manuals

Accessories

  • logging skidding tongs

    Skidding Tongs

    $169.00 Add to cart
  • portable sawmill cover

    Sawmill Cover – Custom Fitted

    $149.00 Add to cart
  • logging lifting tongs

    Lifting Tongs

    $399.00 Add to cart
  • sawmill spare parts kit

    HM126 & HM130 Sawmill Spare Parts Kit

    $149.00 Select options
  • portable sawmill blades

    HM126 & HM130 Blades (Pack of 10)

    $225.00 Add to cart
  • portable sawmill spare parts kit

    HM126 & HM130 Bandwheel Belts

    $44.00 Select options
  • bandsaw blade sharpener

    Blade Sharpener (Automatic)

    $849.00 Add to cart
  • bandsaw blade guide bearings

    Blade Guide Bearings

    $20.00 Select options
  • bandsaw bandwheel bearings

    Bandwheel Bearings

    $58.00 Add to cart
  • cant hook

    4ft Cant Hook

    $119.00 Add to cart
  • 2ft Cant Hook

    $99.00 Add to cart