Why haul logs to your mill, when you can easily take your HM126 Trekker directly to the log pile!
Featuring our extremely capable HM126 sawmill mounted onto a heavy-duty trailer, the HM126 Trekker is a well built, economical solution for sawyers looking for the perfect combination of mobility and durability, while requiring minimal set up time at the job site. Equipped with the reliable 9.5 H.P. Kohler gas engine and offering the ability to mill logs up to 26” (66cm) in diameter and 10’ 5” (3.1m) in length, this mobile sawmill will exceed your expectations.
All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn and well located hand crank system. The blade is kept lubricated by utilizing a water drip system to prevent sap from gumming up your blade.
- 9.5 H.P Kohler gas engine
- Rigid 4 post head design
- Centrifugal clutch blade engagement system
- 26″ (66cm) log diameter capability
- 19″ (48cm) square cants
- 10’ 5” (3.1m) log lengths
- 19″ (48cm) cast iron band wheels
- 2.6 Gallon (10L) aluminum lubrication tank to keep the blade lubricated while cutting
- Hand crank system to raise and lower the head with very little effort
- Powder coated and galvanized steel finishes
- “Gas and Go” easy handle throttle design
Gross Vehicle Weight: HM126 Trekker Package (HM126 Sawmill & Trekker Trailer) – 1,405 lbs (640kgs). Note: This package is not designed to carry cargo.
Sawmill Trailer Facts
- 12’10″ track providing the ability to cut log lengths up to 10’ 5” (3.1m)
- Galvanized steel frame
- Torsion axle suspension system
- Department of Transportation (DOT) approved tires
- 4 pin LED light kit (stop, turn, tail, side markers and licence plate light)
- Safety chains
- 2” (50mm) ball receiver
- 4 leveling jacks enable quick and stable sawmill setup on uneven ground
- Sawmill head locking kit (locks the head to the trailer for transport)
Note: This trailer package can easily be upgraded to the 16’ (5 meter) version at a later date if desired.
The mill is capable of cutting 26″ (66cm) diameter logs up to 10′ 5″ (3.1m) long. Capable of squaring cants at 22″ (55cm) or skimming veneers at as thin as 1/16″ (1.6mm). The HM126 Trekker will cut within 1″ (25mm) of the deck ensuring you maximize your usable board foot output.
Note: This trailer package can easily be upgraded to the 16’11″ (5.1m) XL version at a later date if desired.
The HM126 Trekker sawmill is powered by a 9.5 H.P 4-cycle Kohler gas engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty.
Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.
The head of our machine rolls along rigid 2.5″ x 4″ (63mm x 101mm) galvanized “L” channel which is cross supported with heavy duty 3″ x 6″ (76mm x 152mm) rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentations. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track allows for 10’5” log lengths. This trailer package can easily be upgraded to the 16’11″ (5.1m) XL version at a later date if desired.
The track system is mated to the trailer package which features 1/4” (6mm) thick laser cut and bent side plates and tubular cross supports making the two work together to create an extremely rigid chassis.
The HM126 utilizes standard 1.25″ x 144″ x .042″ (32mm x 3658mm x 1mm) Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ (2mm) to maximize the most amount of lumber per log.
The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (tires, belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.
* Stocked items are delivered to your door within 2 to 11 business days. Tailgate service provided to most areas.
Approximate Delivery Times
Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.