Product DescriptionAll major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn and well located hand crank system. The blade is kept lubricated by utilizing a water drip system to prevent sap from gumming up your blade.
CuttingThe mill is capable of cutting 30″ (76cm) diameter logs up to 10′ 5″ (3.1m) long. Capable of squaring cants at 22″ (55cm) or skimming veneers at as thin as 1/16″ (1.6mm). The HM130 Trekker will cut within 1″ (25mm) of the deck ensuring you maximize your usable board foot output. Note: This trailer package can easily be upgraded to the 16’ 11″ (5.1m) XL version at a later date if desired.
PowerThe HM130 Trekker sawmill is powered by a 14 HP 4-cycle Kohler gas powered electric start engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty. Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease. Official Kohler CH440 Engine Site.
If you would like to utilize the electric start option on your sawmill, you will be required to purchase a 12V battery. The engine does not require the battery if you choose to use the recoil start option instead.
Track SystemThe head of our machine rolls along rigid 2.5″ x 4″ (63mm x 101mm) galvanized “L” channel which is cross supported with heavy duty 3″ x 6″ (76mm x 152mm) rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentations. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track allows for 10’ 5” (3.1m) log lengths. This trailer package can easily be upgraded to the 16’ 11″ (5.1m) XL version at a later date if desired.
BladesThe HM130 utilizes standard 1.25″ x 144″ x .042″ (32mm x 3658mm x 1mm) Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ (2mm) to maximize the most amount of lumber per log.
WarrantyThe sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (tires, belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.
|Power||14HP Kohler Pro Command gas electric start engine|
|Log Diameter Capacity||30" (76cm)|
|Log Length Capacity||10'5" (3.1m) - Upgradeable to longer XL version|
|Distance Between Blade Guides||22" (56cm)|
|Maximum Cut Depth||7" (18cm)|
|Last Cut Off Deck||1" (2.5cm)|
|Maximum Cut Width||21" (53cm) Square Cant or 22" (55cm) Live Edge|
|Last Cut Off Deck||1" (2.5cm)|
|Track Rail Construction||2.5" x 4" (63mm x 100mm) Galvanized Steel Rails|
|Track Log Bunks (Rectangle Tube Steel)||3" x 6" (75mm x 150mm) Powder Coated|
|Stainless Steel Log Bunk Covers||Included|
|Leveling Feet||Set of 12 Included|
|Log Clamps||1 Quick Lock Style|
|Head Design||2"x2" (50mm x 50mm) 4 Post|
|Bandwheel Diameter||19" (48cm)|
|Blade Size||Lenox 1.25" Width x 144" Length x 7/8" Pitch (32mm x 3658mm x 22mm)|
|Blade Engagement System||Centrifugal Clutch (Gas & Go)|
|Lubricant Tank||3.4 Gallon / 13 Litre Aluminium|
|Trailer Axle||Torsion Axle Design|
|Trailer Wheels||5 Bolt on 4.5" (114mm) & 195/60/14 Tires.|
|Trailer Lights||LED light kit (stop, turn, tail, side markers and licence plate light)|
|Trailer Levelling Jacks||4 Included|
|Trailer Ball Coupler||2" (50mm)|
|Finish||Powder Coat Paint / Galvanized Steel|
|Sawmill Weight||1455 lbs (660 kgs)|
|Shipping Weight||1555 lbs (705 kgs)|
|Sawmill Warranty||2 Year Parts Warranty|
|Engine Warranty||3 Year Warranty (Offered directly through Kohler)|
* Stocked items are delivered to your door within 2 to 11 business days. Tailgate service provided to most areas.
Approximate Delivery Times
Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for states and remote locations.