Product DescriptionThe HM130 was designed for sawyers looking for more horsepower and bigger log capacity. Featuring a 14 HP Kohler gas/petrol engine, 30” (76cm) log diameter cutting capacity and a rigid 4 post head design. All major steel components feature either a powder coated or galvanized steel finish, ensuring your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn hand crank system. The blade is kept lubricated by utilizing a water drip system. This prevents sap from gumming up your blade.
CuttingThe mill is capable of cutting 30" (76cm) diameter logs up to 10’ 5” (3.1m) long. Additional track sections are available in 6’ 5” (1.95m) increments. Capable of squaring cants at 22" (56cm) or skimming veneers at as thin as 1/16" (2mm). The HM130 will cut within 1" (25mm) of the deck ensuring you maximize your usable board foot output.
PowerA reliable 14HP 4 cycle Kohler gas powered electric start engine powers the HM130. Featuring a slant cylinder design with a cast iron cylinder bore and overhead value for easy access. The Quad-Clean 4 stage air filtration systems ensures only clean air enters the engine for maximum power and life of the engine. The industrial centrifugal clutch offers easy gas-and-go operation.
If you would like to utilize the electric start option on your sawmill, you will be required to purchase a 12V battery. The engine does not require the battery if you choose to use the recoil start option instead.
Track SystemThe head of our machine rolls along rigid 2.5″ x 4″ (63mm x 101mm) “L” channel which is cross supported with heavy duty 3″ x 6″ (76mm x 152mm) rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentation. These cross supports are also covered with a stainless steel cap to prevent certain woods (such as oak) from being stained from contact with painted surfaces. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track itself consists of two 6’ 5” (1.95m) sections allowing for 10’ 5” (3.1m) log lengths. Additional 6’ 5” (1.95m) tracks may be attached to accommodate logs of any length.
BladesThe HM130 utilizes standard 1.25″ x 144″ x .042″ (32mm x 3658mm x 1mm) Lenox Woodmaster hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ (2mm) to maximize the most amount of lumber per log.
WarrantyThe sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.
|Power||14HP Kohler Pro Command gas electric start engine|
|Log Diameter Capacity||30" (76cm)|
|Log Length Capacity||10'5" (3.15m)|
|Additional Track Extensions||6'5" (1.95m) (Multiple extensions can be added on)|
|Distance Between Blade Guides (Adjustable Blade Guide)||13.5" - 22" (34cm - 56cm)|
|Maximum Cut Depth||7" (18cm)|
|Last Cut Off Deck||1" (2.5cm)|
|Maximum Cut Width||21" (53cm) Square Cant or 22" (55cm) Live Edge|
|Last Cut Off Deck||1" (2.5cm)|
|Track Rail Construction||2.5" x 4" (63mm x 100mm) Galvanized Steel Rails|
|Track Log Bunks (Rectangle Tube Steel)||3" x 6" (75mm x 150mm) Powder Coated|
|Stainless Steel Log Bunk Covers||Included|
|Leveling Feet||Set of 12 Included|
|Log Clamps||1 Quick Lock Style|
|Head Design||2"x3" (50mm x 75mm) 4 Post|
|Bandwheel Diameter||19" (48cm)|
|Blade Size||Lenox 1.25" Width x 144" Length x 7/8" Pitch (32mm x 3658mm x 22mm)|
|Blade Engagement System||Centrifugal Clutch (Gas & Go)|
|Lubricant Tank||3.4 Gallon / 13 Litre Aluminium|
|Finish||Powder Coat Paint / Galvanized Steel|
|Sawmill Weight||850 lbs (386 kgs)|
|Shipping Weight||900 lbs (409 kgs)|
|Sawmill Warranty||2 Year Parts Warranty|
|Engine Warranty||3 Year Warranty (Offered directly through Kohler)|
* Stocked items are delivered to your door within 2 to 11 business days. Tailgate service provided to most areas.
Approximate Delivery Times
Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.