Canada (EN)
Canada (EN)
A 12’10″ (3.9m) length provides the ability to cut log lengths up to 10’ 5″ (3.1m) - (XL trailer package available – 16’ 11” (5.1m) log lengths). It features a galvanized steel frame, torsion axle suspension system and Department of Transportation (DOT) approved tires. LED light kit (stop, turn, tail, side markers and licence plate light), safety chains and a 2” (50mm) ball receiver also come standard with the trailer. 4 leveling jacks enable quick and stable sawmill setup on uneven ground. A sawmill head locking kit (locks the head to the trailer for transport) is included in the trailer package.
Included with the trailer package is an LED light kit featuring stop, turn, tail, side markers and licence plate lights which are powered through the standard wire harness adapter from your vehicle.
The trailer package comes standard with four (standard trailer) or six (XL trailer) 3,000 lb (1,360kgs) sidewind levelling jacks to quickly and easily level the sawmill front to back and side to side. The swivel jacks can be rotated from the horizontal travel position to the vertical position for quick mill set up. They provide a full 10” (25cm) of height adjustability. The foot measures 3.75” x 7.5” (95mm x 190mm).
The trailer chassis rests on a pair of rubber torsional axles with a combined load capacity of 1,870 lbs (850kgs). The hubs are a 5 bolt on 4.5” (114mm) and the tires are DOT approved 5.30-12. The wheel fenders are made of steel and can easily be removed without the use of tools so they are out of the way when operating the sawmill or loading logs.
Features a standard 2” (50mm) ball coupler, wiring harness adapter and safety chains. The head of the sawmill is secured to the trailer at a location which provides proper tongue weight for safe towing. The trailer manual provided specifies this location.
The trailer includes our sawmill head lock down kit so that you can safely secure the sawmill head to the trailer during transportation. Four (4) 3/8” (9.5mm) pins go through the sides of the trailer and the brackets attached to the head. A heavy-duty ratchet strap is also included as a secondary measure for securing the sawmill head to the trailer.
The sawmill trailer is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (bearings, axles and tires).
Although it is sold as an off-road package. Road safety components are included to aid in the registration as a home-built trailer in your jurisdiction. Every province, state and country have different requirements and it is recommended to check with your region requirements.
| Trailer Axle | 1,870lb (850kgs) Independent Torsion Axle Design |
| Trailer Wheels | 5 Bolt on 4.5" (114mm) & 5.30-12 DOT Approved Tires |
| Trailer Lights | LED light kit (stop, turn, tail, side markers and licence plate light) |
| Trailer Levelling Jacks | Woodlander™: 4 levelling jacks; Woodlander™ XL: 6 levelling jacks |
| Trailer Ball Coupler | 2" (50mm) |
| Finish | Powder Coat Paint / Galvanized Steel |
| Fenders | Removable |
| Safety | Locking pins and safety straps to secure sawhead while travelling |
| Shipping Weight | 655 lbs (297 kg) |
Most orders can be shipped to your home or business address with curbside delivery. Stocked items are shipped from a warehouse close to you within 2 to 11 business days*. Tailgate service on a transport truck provided to most areas. Once your order is shipped, a tracking number will be provided for a more accurate delivery time.
Shipping Weight: 655 lbs (297 kg)
* Some residential deliveries may require additional days of service. Remote locations and regions are excluded from flat rate shipping. If you are identified in a remote postal code, our sales staff will contact you to review additional shipping costs. Remote areas include but are not limited to Alaska, Hawaii, Puerto Rico, Yukon Territories, Northwest Territories, Nunavut.
Copyright, 2020. Woodland Mills Inc. All Rights Reserved.
Woodlander™, Multilander™, and RapidChange™ are trademarks owned by Woodland Mills Inc.
