We're sorry, but we are currently receiving more phone calls and email inquiries than anticipated. Please expect a delay in response. If you're ready to order, we encourage you to order online.
Monthly payments with(Learn More)
Flat Rate Shipping
2 Year Warranty
Same Price Policy
A 12’10″ (3.9m) length provides the ability to cut log lengths up to 10’ 5″ (3.1m) - (XL trailer package available – 16’ 11” (5.1m) log lengths). It features a galvanized steel frame, torsion axle suspension system and Department of Transportation (DOT) approved tires. LED light kit (stop, turn, tail, side markers and licence plate light), safety chains and a 2” (50mm) ball receiver also come standard with the trailer. 4 leveling jacks enable quick and stable sawmill setup on uneven ground. A sawmill head locking kit (locks the head to the trailer for transport) is included in the trailer package.
Included with the trailer package is an LED light kit featuring stop, turn, tail, side markers and licence plate lights which are powered through the standard wire harness adapter from your vehicle.
The trailer package comes standard with four (4) 3,000 lb (1,360kgs) sidewind levelling jacks to quickly and easily level the sawmill front to back and side to side. The swivel jacks can be rotated from the horizontal travel position to the vertical position for quick mill set up. They provide a full 10” (25cm) of height adjustability. The foot measures 3.75” x 7.5” (95mm x 190mm).
The trailer chassis rests on a pair of rubber torsional axles with a combined load capacity of 1,870 lbs (850kgs). The hubs are a 5 bolt on 4.5” (114mm) and the tires are DOT approved 5.30-12. The wheel fenders are made of steel and can easily be removed without the use of tools so they are out of the way when operating the sawmill or loading logs.
Features a standard 2” (50mm) ball coupler, wiring harness adapter and safety chains. The head of the sawmill is secured to the trailer at a location which provides proper tongue weight for safe towing. The trailer manual provided specifies this location.
The trailer includes our sawmill head lock down kit so that you can safely secure the sawmill head to the trailer during transportation. Four (4) 3/8” (9.5mm) pins go through the sides of the trailer and the brackets attached to the head. A heavy-duty ratchet strap is also included as a secondary measure for securing the sawmill head to the trailer.
The sawmill trailer is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (bearings, axles and tires).
While the Woodlander™ trailer is sold as an off-road trailer, some customers have been successful in licensing it for highway use as a home built or "ubilt" trailer. Every province, state and country has different requirements and it is recommended to check with your regions particular requirements firstly.
The Woodlander trailer is available in two cut lengths: Standard -10’ 5″ (3.1m) and XL - 16’ 11” (5.1m). Additional extensions cannot be added to the XL trailers.
|Trailer Axle||Independent Torsion Axle Design|
|Trailer Wheels||5 Bolt on 4.5" (114mm) & 5.30-12 DOT Approved Tires|
|Trailer Lights||LED light kit (stop, turn, tail, side markers and licence plate light)|
|Trailer Levelling Jacks||Woodlander™: 4 levelling jacks; Woodland XL: 6 levelling jacks|
|Trailer Ball Coupler||2" (50mm)|
|Finish||Powder Coat Paint / Galvanized Steel|
|Safety||Locking pins and safety straps to secure sawhead while travelling|
|Shipping Weight||640 lbs (290 kg)|
Shipping Weight: 640 lbs (290 kg)