Michael H

Verified Customer
Nov 01, 2019

WC68

I bought this chipper after being asked by a customer to chip branches and limbs from about 3/4 acre of woods that he thinned out. I knew I wouldn’t be able to get a big tow behind chipper where he cleared and the versatility of the tractors three point hitch mounted chipper was perfect for this terrain. I was honestly a bit skeptical about this chipper being able to take 6” limbs but time after time it pulled them through with minimal backing up with the roller. Most of the limbs I chipped were about 3”-4” and I ran this on full speed all the time. Even for the 6” limbs it was great. I’m running this on a Kubota L3901. I believe the PTO horsepower is roughly 32 hp at 540 rpm. One thing to be mindful of is the nuts that stop the roller adjustment bolts loosened up on me causing the roller to raise about an inch or so and it wasn’t feeding anything smaller than that. It took a few minutes for me to realize what happened and readjust and tighten them. Other than that, I ran this for about 22 hours over three days and it proved to be a tough and productive machine. I am very happy with my experience with the Woodland Mills company and will be doing business with them again should I need a stump grinder, sawmill or other product they may offer.

Sean T

Verified Customer
Nov 01, 2019

WC68

This is a well made chipper. Works great.

Mike O

Verified Customer
Oct 31, 2019

WC68

Our Woodland Mills WC68 makes easy work of the countless brush piles we have after 100+ mph winds devastated our woods. Paired with our John Deere 2032r we have chipped Popple, Birch and Basswood up to 5". Any hard Maple or Red oak not salvaged for firewood don't slow the chipper down at all. All assembly required went well with well written instructions. I would definitely recommend this chipper. You have designed a great machine Woodland Mills!

Mark M

Verified Customer
Oct 31, 2019

WC68

This thing is built like a tank. I'm very impressed with the construction quality.

Simon-Pierre D

Verified Customer
Oct 31, 2019

WC68

I was very please to receive my wood chipper fast and in good condition The assembly procedure is easy took me 2 hours The machine perform great and took everything without forcing on the tractor JD 2032R Je suis très satisfait de mon achat

Robert C

Verified Customer
Oct 31, 2019

WC68

Works better than advertised. Put 4-5” 30’ long fresh hemlock with no problems. Very good construction.

John R

Verified Customer
Oct 31, 2019

WC68

Very impressed with the machine, both the quality of construction and performance. I did have a 12 inch, 100 hp Morbark chipper so I am quite familiar with what a chipper can do. Your's is an outstanding machine.

Evan C

Verified Customer
Oct 31, 2019

WC68

Perfect for the weekend farmer. We’ve been piling up wood piles of downed trees and large limbs over the last several years. The WC-68 has made small work of them. I even go to neighbors to help them with downed trees - they’re so impressed how quick this takes care of the problem and how easy it is. Thsnx woodland mills!!!

Jerry H

Verified Customer
Oct 31, 2019

WC68

The WC68 arrived on time and was easy to assemble. It works great attached to my John Deere 3032 tractor. I have cleaned up some branches and brush that had accumulated from wind storms lately and will be doing more in the spring. So far it has worked great and am looking forward to using it in the future. Thanks for a well built product. Sorry no pictures at this time.

Marc R

Verified Customer
Oct 31, 2019

WC68

This is a great high quality machine. It does everything i expected and more. I should have bought one sooner.

Showing 31-40 reviews of 302.

JOIN OUR NEWSLETTER!