Woodland Mills is pleased to offer our newly designed and exclusive 6” (15cm) PTO drive wood chipper with auto hydraulic feed. The WC68 was designed to offer acreage owners an economical and well engineered wood chipper. This is a serious wood chipper, with a huge 6” (15 cm) chipping capacity. It was built to be the best valued wood chipper in its class.
CapacityThe WC68 operates on tractors with 20-50 HP at the PTO. It utilizes a large 23” x 27” (58cm x 69cm) infeed hopper opening that tapers down to a 6” x 8” (15 cm x 20 cm) opening where the 8.25” (21cm) diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼”(6mm) diameter and as large as 6” (15 cm) diameter can be fed through the WC68. To chip full 6” (15cm) diameter logs at full infeed speed, tractors with over 40 HP at the PTO is required.
Hydraulic Infeed SystemBranches are pulled into the WC68 via the large 8.25” (21cm) diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is belt driven from the main flywheel shaft. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.
FlywheelThe dynamically balanced 24” (61cm) diameter, 3/4” (2cm) thick, and 100 lb / 45 kg solid steel flywheel runs on a 2” (5cm) diameter shaft and is supported by 2 industrial and greaseable flanged bearings. It features four CNC machined pockets to hold the reversible blades. The flywheel features four large fan blade paddles that spin at over 540 RPM.
Chipper BladesThe WC68 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart. They can be flipped to take advantage of having two cutting edges on one blade. Each blade is held onto the flywheel with four countersunk M10 bolts and locking nuts. Changing blades can be done very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.
Folding Infeed ChuteThe infeed chute on the WC68 wood chipper has a large 23” x 27” (58 cm x 69 cm) opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.
Infeed OpeningThe opening in the flywheel housing is a large 6” x 8” (15cm x 20cm) square making it quite easy to accept branches with several limbs. This reduces the need to trim your branches down before feeding them into the chipper.
Discharge ChuteThe discharge chute was designed to rotate 360 degrees by simply loosening the eye bolt and spinning it by hand to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 66” (1.7m) off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground or into a trailer.
PTO ShaftIncluded with the WC68 chipper is the PTO shaft complete with a shear pin.
The WC68 chipper will arrive in a steel crate and can be up and running in as little as one hour. The infeed chute and discharge chute have been removed during shipping to eliminate the possibility of damage. The chipper will require 5 gallons (20L) of ISO 32 hydraulic oil in the tank which is not included, but can be purchased at most farm or hardware stores. Lastly, attach the PTO shaft that comes included and trim it to length for your tractor as per the manual if required.
The WC68 was designed for property owners, but built like a commercial wood chipper. It weighs in at 710 lbs (320kgs).
The WC68 is covered by a full 3 year warranty against any manufacturing defects. If a part breaks, we simply ship you a new one from our fully stocked warehouse. Warranty parts can be shipped out same day or next day. Wearing parts such as belts, bearings and blades are not covered under our warranty.
|Drive System||Tractor PTO|
|Transport||Tractor 3 Point Hitch|
|Minimum HP Required (at the PTO)||18 HP|
|Maximum HP (at the PTO)||50 HP|
|Hydrualic System||Standard NPT Fittings & Valves|
|Hydraulic Oil||19 L / 5 gallons of ISO 32 or ISO 46 (warmer climates)|
|Hydraulic Pump||Belt Driven|
|Flywheel Diameter/Thickness||24" x 3/4" thick (61cm x 2.0 cm thick)|
|Flywheel Weight (excludes knives, bearings, shafts etc.)||100 lbs (45kgs)|
|Flywheel Speed||540 RPM|
|Flywheel Drive System||Direct Drive|
|Flywheel Housing Design||Easy To Open Clamshell (for easy clean out and blade changes)|
|Flywheel Housing Thickness||5/16" (8mm) Thick|
|Flywheel Shaft||2" (50mm) Diameter|
|Number of Blades||4 Reversible Blades|
|In-feed System||Self Contained Hydraulic System|
|In-feed Drive||Forward/Neutral/Reverse With Variable Speed (0-75 ft-min) / (23 m/min)|
|In-feed Roller Size||8.25" (21cm) Chisel Tooth|
|In-feed Opening||6" tall x 8" wide (15cm x 20cm)|
|In-feed Roller Pressure||Adjustable via Spring Tension|
|Quick Hitch Compatible||Yes|
|Discharge Chute||360 Degree Swivel|
|Chipper Base||Adjustable Laser Cut Plate Design|
|Finish||Powder Coat Paint|
|Chipper Weight||710 lbs (322 kgs)|
|Shipping Weight||800 lbs (363 kgs)|
|Warranty||3 Year Parts Warranty|
|PTO Shaft||Shear Pin Protected PTO Shaft Included|
* Stocked items are delivered to your door within 2 to 11 business days. Tailgate service provided to most areas.
Approximate Delivery Times
Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.